-
Not for the faint of heart. This heavy duty cutter has a 2″ Carbid cutting surface. Its unique domed construction allows you to cut safely and easily. This is a must have for any pro shop! Straight shank only. -
BIGGER 1 3/4” diameter. 2X MORE sanding channels for more consistent surface contact. 120 Grit. -
We can transform any high resolution digital art into an embroidery design to enhance the image of your business. Turbo offers custom embroidery service right in-house. Quick and convenient, with a wide selection of colors to choose from, we can add your custom logo, backname signature, initials etc. to most any sportswear product with only a few days turnaround. Digitizing services are also available.For more information on our custom embroidery services, please contact us directly at: 800-530-9878
-
If you frequently suffer from fit or release problems related to finger swelling, then Switch Grip® Interchangeable Finger Assemblies are right for you. Switch Grip® Finger Assemblies use the same technology and locking mechanism as our popular Thumb Assemblies which consists of an Outer Sleeve and removable Inner Sleeve. Outer Sleeve - o.d. 1 1/8”. Inner Sleeve - i.d 31/32”. Inner Sleeve can be equipped with finger inserts 31/32” o.d. which include Turbo insert sizes 19/32 – 13/16”. -
2 sizes Available: Large (Thumb-shown at left in red) and Small (Fingers or Small Thumb sizes shown at right in blue). Colors may vary. Switch A Roo Locking Tools can be used to remove Inner Sleeves that become tight due to climate changes (expanding ball cores), loose debris that can get down into hole and under locking channel or for other uncontrollable factors. Simply insert the cone-shaped rubber end into insert hole, twist and remove. Colors may vary. -
Aids in lifting an Inner Sleeve insert up and out of a tight thumb hole. Removable inserts can become difficult to remove when a ball core expands due to hot/cold climate changes or simply over time as the ball absorbs lane oil. Ball core expansion puts pressure on the Switch Grip Outer Sleeve which causes difficulty in removing or turning the Inner Sleeve. The Jack aids in removing Inner Sleeves that tighten up in ball. Colors may vary. -
Convenient all-purpose utility knife best used to remove and insert traditional bowling tape in thumb holes. -
- Axis point locator
- Match track line on bowling ball to the lines laid out on Armadillo to locate bowler’s PAP
-
Made from the purest industrial chemicals which ensures a longer shelf life and stronger bond, Slo-zip has a slower set or cure time and is recommended for the installation of Switch Grip® Interchangeable Insert Assemblies. Each 1 oz. bottle includes an extended tip to help dispense adhesive properly. Make sure you get full-use of your adhesive by adding Turbo Flexi Tips which fit over the top of Zip-45 extended tip and helps prevent clogging, messy dripping and over use. 24 replacement tips included in each bag. -
Turbo offers Drilling Spec Sheets and Wax Layout Pencils. Keep spec pads handy to record important ball layout and drilling information. Xtreme Dealers receive a complimentary pad (100 sheets) and supply of wax pencils; 1x annually. Available with direct orders only. Additional pads and pencils (3) can be purchased for $5/set. While Supplies Last. -
This system is designed to hold two different styles or colors in all 19 sizes; 19/32 – 29/32- Capacity: 400 inserts
- Dimensions: 26.5" x 23.625" x 3"
- Quad Storage System also available and holds 2 colors in 15 sizes; 17/32 – ¾; Capacity: 300 inserts
-
Compliment the Finger Insert Storage System with a Thumb Storage System. Inventory will be a breeze. This system is designed to hold all 18 sizes of thumb inserts, one style. Also can be used to store thumb solids.- Capacity: 110 thumb inserts or solids
- Dimensions: 20" x 26.5" x 3.5"
-
Keep your inventory in clear site with our convenient wall storage systems.- Capacity: Stores up to 28 Outer Sleeves and 39 Inner Sleeves
- Dimensions: 13.68" x 26.5" x 4"
-
- 1½ drill bit; straight shank with auto depth stopper
- 30 Outer Sleeves (complete up to 30 balls)
- 10 Inner Sleeves with urethane solid
- 1 bottle Slo Zip adhesive
- Twist and Lock Pad
- Switch A Roo Universal Locking Tool - Thumb
- Switch Grip® Accessory Case – Holds up to 5 Inner Sleeves
- Switch Grip® 24” x 18” wall banner
-
Installation video available on-line.- 1 1/8” drill bit; ONLY straight shank with auto depth stopper
- Storage Case
- 10 Outer Finger Sleeves (complete up to 5 Balls)
- 24 Inner Finger Sleeves
- 24 Perfect Oval finger inserts (2 ea. 19, 5, 21, 13; 4 ea. 11, 23, 3, 25 – Try Before You Buy)
- 1 bottle Zip 45 adhesive
- Installation video available on-line.
- 1 bottle Slo Zip adhesive
- Switch A Roo 2 Locking Tool - Finger
-
The hottest brands in bowling know Turbo brand Inserts are the best and most reliable brand of inserts in bowling. Brands such as 900 Global, Brunswick, Columbia 300, DV8, Ebonite, Hammer, Motiv, Roto Grip, Storm & Track exclusively feature Turbo and Switch Grip® Interchangeable inserts at their popular on-lane ball demos. Step up your level of service and offer something no on-line retailer can offer, Try Before You Buy! Just like major ball brands, you too equip some of your display equipment with Switch Grip® Interchangeable Thumb and Finger inserts and allow your customer to Try equipment Before They Buy. We have Starter Kits to get you going. Try Before You Buy Starter Kit for Thumb Assemblies; Urethane or Xcel Vinyl- Counter Display and Storage Tray (also sold separately)
- 3 Outer Thumb Sleeves
- 18 Inner Sleeves with size stamp on outside of sleeve*
- Switch A Roo; Large Thumb
- 1 bottle Slow Zip Adhesive
- Promotional banner 24” x 18”
- Ball Display Hot Buttons
-
This is an ideal package for pro shops just opening a new retail location or a pro shop looking to revamp their work and storage space.- 400 Inserts; choice of style and 2 colors, 10 ea. size 19/32 – 29/32
- 1 FREE Wall Storage Rack which holds all inserts
- 100 Urethane Solids; choice of color and size, 10/style/color/size
- 1 FREE Slug Storage Rack which will hold all solids
- 1 Zip Plus-45 adhesive recommended for finger insert installation
- 1 Slo Sip adhesive recommended for thumb solid and Switch Grip® installation
- 1 Pro Sect Quarter Scale
- 1 – Driven to Bowl Banner, 24’ x 18”
-
Dimensions: 15” x 6” x 8.5”- Offer Bowlers Tape by the Sheet.
- Economical and Convenient.
- Hangs from slot wall or can be used as counter display.
- Dispenser includes 1 Bulk Roll/500 pcs of each 1” Orange, Yellow, ¾” Pink, Blue and 1” Vinyl Slick Strip.
- 2500 pcs total.
- Bulk Rolls also sold separately.
-
Card Size: 12” x 13”, free standing- Equipped for slotwall or counter display
- Includes 1 box each:
- 1/8” Shur Cushion® - 20 pcs
- 1/4” Shur Cushion® - 20 pcs
- Shur Hook® - 40 pcs
- Shur Out® - 40 pcs
-
The Classic-PRO has the same great shape and fit as our popular Quad Classic (Perfect Oval/Power Regular combo) but in NEW 55 durometer hardness. The stiffer flex and firm texture of the Classic-PRO make it great insert option for competitive bowlers who have a tough time using softer-textured inserts at 40-42 Durometer hardness. Feeling is believing. Try them today! Side1: Perfect Oval—is designed as a true, milled oval shape. This oval shape is flat through the center and is the most like the shape of your fingertip giving you a very natural and relaxed fit. Side 2: Power Lift 1/4”—helps increase loft and length of release to the target. The finger pad has a flat edge and smooth surface for a sharp, clean feel. Durometer: Updated 55 Shore A Sizes Available: 19/32 -29/32, Standard 31/32” diameter for sizes 19/31 - 13/16, 1 1/32” diameter for sizes 53/64 - 29/32. Colors: Black and Blue ONLY -
Available in: 19 sizes, 2 colors, Standard 31/32” diameter for sizes 19/31 - 13/16, 1 1/32” diameter for sizes 53/64 - 29/32. Side 1: Power Lift 1/4” – helps increase loft and length of release to the target. The finger pad has a flat edge and smooth surface for a sharp, clean feel. Side 2: Semi-Super Bump or Relaxed Finger Tip – has a smooth, rounded bump close to the front edge. When properly fit, the bump rests under the first knuckle of the finger. It is designed for a more relaxed grip and ideal for bowlers who suffer from arthritis or have weak grip pressure.
-
QUAD® (Q) - Available in: 19 sizes, 9 colors, Standard 31/32” diameter for sizes 19/31 - 13/16, 1 1/32” diameter for sizes 53/64 - 29/32. Ms. QUAD® (MQ) - 7/8" diameter, Available in 15 sizes, *5 colors.Side 1: Perfect Oval – Milled Oval with Smooth or Mesh Surface – designed as a true, milled oval shape. This oval shape is flat through the center and is the most like the shape of your fingertip giving you a very natural and relaxed fit. Use mesh textured surface for a tackier feel. Side 2: Power Oval – has 1/8″ forward pitch for more subtle increase in loft. The finger pad has a contoured shape and smooth surface. Ideal for most bowlers.
-
Available in: 19 sizes, 2 colors, Standard 31/32” diameter for sizes 19/31 – 13/16, 1 1/32” diameter for sizes 53/64 – 29/32. Side 1: Power Nub – Lined with rows of small, raised bumps, the Power Nub has a very sharp feel and is not for the faint of grip! This style is recommended for a strong grip. Side 2: Semi-Super Bump or Relaxed Finger Tip – has a smooth, rounded bump close to the front edge. When properly fit, the bump rests under the first knuckle of the finger. It is designed for a more relaxed grip and ideal for bowlers who suffer from arthritis or have weak grip pressure.
-
Available in: 19 sizes, 9 colors, Standard 31/32” diameter for sizes 19/31 - 13/16, 1 1/32” diameter for sizes 53/64 - 29/32. Side 1: Perfect Oval – is designed as a true, milled oval shape. This oval shape is flat through the center and is the most like the shape of your fingertip giving you a very natural and relaxed fit. Side 2: Power Lift 1/4” – helps increase loft and length of release to the target. The finger pad has a flat edge and smooth surface for a sharp, clean feel.
-
Recommended for the installation of all finger inserts, Urethane Thumb Solids or Xcel (Vinyl) Thumb Inserts. Zip Plus-45 is an industrial compound adhesive which ensures exceptional bond and longer shelf life. Each 1 oz. bottle includes an extended tip to help dispense adhesive properly into holes. Make sure you get full-use of your adhesive by adding Turbo Flexi-Tips which fit over the top of Zip-45 extended tip and helps prevent clogging, messy dripping and over use. 24 replacement tips included in each bag. -
Make sure you get full-use of your adhesive by adding Turbo Flexi-Tips which fit over the top of Zip-45 extended tip and helps prevent clogging, messy dripping and over use. 24 replacement tips included in each bag. -
- 100% urethane, quick release, consistent feel
- Pre-sanded outside surface
- Hardness 72 (+/- 2) Shore D
-
Unlike the smooth, quick release of our Urethane solids, Xcel thumb sleeves have a grainy texture when finished and aid in slowing release or gaining grip. This product is often recommended for bowlers with very dry skin. For retail convenience, the soft, vinyl blend of material makes Xcel Thumb Inserts easy to drill and cut without the use of a router or plug cutter. Hardness: 47 (+/- 3) Shore D Available Styles: Round, no taper; Oval, no taper Available Colors: Black Sizes: 18 sizes, 51/64” – 1 1/16” -
- NON-Stretch Nylon-polyester fabric
- Ultra thin with silky smooth texture
- Use in place of messy powder or liquid skin products
- Apply before bowling to prevent blisters, calluses, cuts
- Dims each roll: 13’ L x 2” W
-
- Stretchable Nylon-polyester fabric
- Smooth texture
- Use in place of messy powder or liquid skin products
- Apply before bowling to prevent blisters, calluses, cuts
- Available in 13’ L x 1” W rolls, 30 pc pre-cut package and 100 pc pre-cut bulk roll
- Color: Blue
-
Tape Roll Dimensions: 13’ L x 1” W- Stretchable Cotton fabric
- Apply to fingers and thumb to adjust fit of hole, ease grip tension and modify release
- Apply before bowling to prevent blisters, callouses, cuts
-
Put some Drive in Your Performance with our signature Driven to Bowl logo tapes.- Cotton fitting tape - Comparable to Purple (5) fitting tape
- Available in Black
-
Made from a quality 5 mil vinyl material, Slick Strips® can be easily inserted into thumb and finger holes to help aid in release. Their smooth, slick feel will give you the confidence you need to perform your best.- 30 pcs per package
- Color: Red
- Available in 3/4” and 1”
-
Fitting Tools are an indispensable tool to ensure proper fit and desired comfort. All fitting tools are configured with each size insert available/style and can be used to fit fingers from the top or bottom of tool depending on the insert style of interest. All available colors/style are represented in each tool. If your retail location does not stock all colors and would like to customize, please contact us directly regarding color selections. Additional lead time required. Note: Custom display stand sold separately.- Available in: Quad™, Classic, Quad2 and Power-SB
- All sizes & colors available per style are represented
-
All Straight shank drills are certified and tested to the specifications of Turbo brand insert products to assure you never have an installation problem. All of our drills are inspected with a tolerance of +.001/-.003. Sizes Available: 7/8”, 31/32”, 1 1/8”, 1 1’4”, 1 3/8”. Xtreme Dealers receive FREE 31/32” and 1 ¼” upon initial enrollment in Turbo Xtreme Dealer program. FREE Sharpening and Replacement Services. We want to ensure the best installation of all our insert products which means keeping those edges sharp and within the tolerance of product dimensions. Turbo will sharpen or replace any Turbo certified drill including Switch Grip drills. Simply call a Customer Support Representative at: 800-530-9878 for details. -
For shops doing a high volume of Switch Grip™ installation, the Reamer End Mill has 8 cutting edges ensuring optimum drill and fit for easy Outer Sleeve installation. Because of the deeper drill depth of the Outer Sleeve and the dense core materials/designs used in many high tech bowling balls, a traditional 1 ½” drill may drift off center, more so toward the bottom of hole. This off center cut will make the Outer Sleeve more difficult to fit properly at bottom because it is tight. Keep in mind the Outer Sleeve is designed to be a press fit and should never be forced into position. If the Outer Sleeve is forced into hole, the Inner Sleeve will not fit properly and be very difficult to insert and remove. The Reamer End Mill ensures a better fit from top to bottom of hole. Available: 1 1/2" Straight Shank with Auto Stopper. -
This handy little tool is used to remove dust and loose particles from the bottom of finger and thumb holes. It easily fits over the end of most power vacuum hoses. The extended tube measures 5 1/2" length and 1/2" in diameter. Get to the bottom of your dust troubles with the Turbo-Vac. -
Each Insert Remover Tool is precision machined on 3 sides of blade so that inserts can be removed without being destroyed and is hardened for strength & durability. The torque bar at top makes grip removal a snap. Includes 1 year warranty replacement. 3 sizes available (7/8”, 31/32”, 1-1/32”) or 3 piece set. -
- Slide rule with pencil guide locks into position for exact span measurement
- Easy to use
- Advanced design for precise measurement
-
A staple in any pro shop regardless of experience. The Pro-Sect® features an easy-to-read ruler designed in 1/16" increments for precise layout and an integrated 180-degree protractor to help indicate degree of angle for oval hole cuts and oval insert installation. A single piece, injected molded construction and intersected design makes The Pro Sect® the most durable and accurate layout tool for straight and perpendicular lines. Professionals can download our Motion Enhancement Guide which outlines many Dual Angle Motion Enhancement Layouts. Mass Bias bowling balls and balls with a strong preferred spin axis can be fine-tuned for specific movement with proper alignment shift and balance hole placement. The Pro Sect® is just the tool to help with more advanced layouts. Colors May Vary. -
Think of Custom Thumb as a copy machine for thumb holes. Custom Thumb is a unique molding process that captures the exact shape and size of any thumb hole including the shape of the beveled edge. Each mold is as individual as your thumbprint. Ask your local pro shop professional for more details and whether Custom Thumb is right for you. Starter Kit: Includes 1 ea. Silicone Mixture Part A & B (8 oz. each, creates 8 custom thumb molds), (2) Custom Thumb cylinders 1 1/4″ and 1 3/8″, clay, mixing cups, stir sticks, along with (2) 8 oz. bottles of White Urethane Material; 1 ea. Hardener and Resin. Sample Mold Kit: Includes 1 ea. Silicone Mixture Part A & B (2 oz ea.), Custom Thumb cylinder 1 ¼”, clay, mixing cup and stir stick. White Urethane Material Kit: Includes (2) 8 oz. bottles White Urethane Material; 1 ea. Hardener and Resin. White Urethane Hardener, 8 oz. bottle. White Urethane Resin, 8 oz. bottle. -
High performance, fast-set, colorable urethane formula ideal for plugging thumb and finger holes, balance holes, Custom Thumb inserts and patching. Set-up time is approximately 7 minutes with a Ready to Go drill time of 45 minutes. Mix ratio is 1:1 by volume. T45 Clear Kit (4) 32 oz. bottles; (2) ea. Hardener & Resin T45 Hardener Clear 32 oz. bottle T45 Resin Clear 32 oz. bottle Clear Sample Kit (2) 2 oz. bottles; (10) ea. Resin and Hardener Call Turbo 586-598-3948 to obtain FREE Sample. -
Formulated concentrated color for use with T45 ball plug. Colors can be blended and used for translucent color tinting and opaque pigmenting. Colors Available: Black, White, Green, Yellow, Orange, Blue, Red, Purple -
Safely softens and dissolves cured CA (cyanoacrylate) based adhesive from surfaces and skin.- 2 oz. bottle
- Includes replaceable spray top for easy application.
-
EZ-Poxy is a 2-part adhesive system for Custom Thumb molded inserts that dries clear in 5 minutes. Excellent system for positioning custom thumb inserts.- (2) 4oz bottles.
