Quad Fitting & Display Tools
An indispensable tool for proper tting.
With the exception of the Quad2 tool, each Quad Fitting & Display Tool includes 24 inserts; all sizes, including 4 Ms. styles and 1/64 (half) sizes are represented. Pro shop price $50. All available colors are represented in each tool. Custom color displays are available at no additional charge. Please contact us directly for details.

Three standard models available:

• Quad Original
• Quad Classic
• Quad2 (Quad2 is currently only
  available in 11 standard sizes.)

Plug Cutter
Not for the faint of heart. This heavy duty cutter has a 2" Carvid cutting surface. Its unique domed construction allows you to cut safely and easily. This is a must have for any pro shop!

Turbo Vac
This handy little tool is used to remove dust and loose particles from the bottom of nger and thumb holes. It easily ts over the end of most power vacuum hoses. The extended tube measures 5 1/2" length and 1/2" in diameter. Get to the bottom of your dust troubles with the Turbo-Vac.

Straight Shank Drill Bits
Turbo wants to ensure easy and clean installation of all our insert products. All of our bits have been inspected with a tolerance of +.001/-.003. Bits available: 7/8", 31/32", 1 1/8", 1 1/4", 1 3/8".

Switch Grip Drill Bits
Straight Shank, Gilmac and #2 Tape drills available for Switch Grip. 

Replacement Drill Bit Service
Turbo wants to ensure the best installation of all our insert products which means keeping those edges sharp. Pro shops who have purchased a Switch Grip Starter Kit which included a 1 1/2" bit with Auto Depth Stopper are eligible for FREE Bit Replacment. Replacement terms will vary by pro shop but is estimated at every 18-24 months. Pro Shops who stock 80% or more Turbo insert products are also eligible to receive a FREE 31/32" & 1 1/4" drill bit and replacement; Extreme Dealers only. For details on replacing your Switch Grip drill bit or for more information on our Extreme Dealer program, contact our office directly at 800-530-9878. Other terms and restrictions may apply.

Reamer
For shops doing a high volume of Swtich Grip installation, the Reamer bit has 8 cutting edges ensuring optimum drill and fit for Outer Sleeve installation. Because the drill depth of Switch Grip is deeper than a traditional thumb solid and the dense core design in many high tech bowling balls, the 1 1/2 drill bit may drift at bottom of hole making the hole slightly off center. Keep in mind the Outer Sleeve is designed to be a press fit. The Outer Sleeve should never be installed with forced pressure. If the Outer Sleeve is forced into hole, the Inner Sleeve will not fit properly and will be very difficult to insert and remove. Reamer Bit 1 1/2" with stopper.

Insert Remover Tool
Each Insert Remover Tool is precision machined on 3 sides of blade so that inserts can be removed without being destroyed and is hardened for strength & durability. The torque bar at top makes grip removal a snap. Includes 1 year warranty replacement. 3 sizes available (7/8”, 31/32”, 1-1/32”) or 3 piece kit.

got grips? Apron
2 Pocket 24” Apron. 65/35 poly/cotton canvas.

Spec Pad and Wax Pencil
Turbo offers convenient Bowler Specification Drill Sheets and Wax Layout Pencil. Keep spec pads handy to record important drilling information. Pro Shops ask for the Spec Bundle which includes 5 Spec Pads and 5 Marking Pencils for only $7.95.